Complete the client consultation form with your client to determine eligibility.
Position your client comfortably on the treatment bed.
Wash and sanitize your hands. Prepare your station.
Remove any makeup or residue from lashes by cleansing them thoroughly.
Comb through lashes with a clean spoolie to ensure they are dry and untangled.
Apply foam tape or gel pads under the eyes, covering all of the lower lashes.
Using a Micro Swab, sweep a small amount of primer on natural lashes from base to tip.
Choose the appropriate silicone pad size for the desired amount of lash lift for your client. You may trim the silicone pad if necessary. Apply clear glue to the bottom of the pad and carefully place it as close to the root of the lashes as possible, ensuring it adheres well to the skin.
After the silicone pad has firmly adhered to the eyelids, apply clear glue on the surface of the silicone pad, working in sections from outer to inner corners. Wait a few moments for each section to start to become tacky, then use the small wood stick or an eyelash comb to align each eyelash onto the silicone pad. Pull the lashes up and over the pad evenly and tightly. Apply more glue if needed and repeat as needed until all lashes are perfectly adhered to the pads.
Apply a portion of packet #1, Perm Lotion, onto a disposable palette. Using a Micro Swab, apply in an even layer across the lash line on the bottom half of the lashes. Leave the tips of the lashes free of lotion. Let lashes process for 10-15 minutes, depending on the length and thickness. Thin eyelashes should process for 10 minutes, thick lashes for 15 minutes. When the time is up, remove the perm lotion carefully and thoroughly from the lashes with a clean Micro Swab, being careful to make sure the lashes stay glued to the silicone pad. Do not use water.
Apply a portion of packet #2, Setting Lotion, onto a disposable palette. Using a Micro Swab, apply in an even layer across the lash line on the bottom half of the lashes. Leave the tips of the lashes free of lotion. Let lashes process for
10-15 minutes, depending on the length and thickness. Thin eyelashes should process for 10 minutes, thick lashes for 15 minutes. When the time is up, remove the perm lotion carefully and thoroughly from the lashes with a clean Micro Swab before applying #3 Lift Serum. Do not use water.
Apply a small amount of #3 Lift Serum onto the disposable palette. Using the micro-swabs, apply Lift Serum onto eyelashes in a thin, even layer and allow to moisturize for 5 mins.
To remove the glue from eyelashes, apply a small amount of water to Micro Swabs or cotton swabs. Slightly saturate lashes with water across the lash line, always moving swab along the lashes in an upward direction to keep the lashes lifted. The glue will soften and start to dissolve. Continue this process until all glue is removed and the lashes release from the silicone pad. You may use another water-saturated swab to remove the silicone pad from the eyelid. CAUTIONS AND WARNINGS: Do not apply on damaged or broken lashes. The cream should not come in contact with the skin. Avoid contact with eyes. If contact occurs, rinse your eyes with cool water. If skin or eye irritation occurs, discontinue use immediately.
Keep cap securely on serum and glue while not in use. Follow the instructions as directed. Creams are a one-time use only. Please use it immediately after it's release and discard after use. Keep out of direct sunlight. Keep out of reach of children